Analysis of Volatiles Released from UV Curable Resin Using UV/Py-GC/MS
UV-curable resins are widely used in applications such as microelectronics packaging, electronic adhesives, optical components, and precision materials. During UV
Applied Pyrolysis Research
Explore applied pyrolysis research with Py-GC/MS, pyrolysis reactors and catalyst screening. Advance material characterization and chemical analysis with innovative research techniques.
Analysis of Polyvinyl Alcohol Contaminated with a Small Amount of Polymer Using HC/EGA-GC/MS
Polyvinyl alcohol (PVA) is a water-soluble synthetic polymer used in a wide range of industrial and commercial applications. During manufacturing,
Quantitative Analysis Using Pyrolysis-GC/MS: Calibration and Reproducibility
How Calibration Supports Quantitative Pyrolysis-GC/MS Analysis Quantitative analysis using Pyrolysis-GC/MS (Py-GC/MS) can provide valuable information about the amount of specific
Challenge of High-Boiling-Point Compounds in Pyrolysis-GC/MS Analysis
Usefulness of Backflush Combined with Smart Pre-Column in Pyrolysis-GC/MS Measurements Introduction Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS) is a powerful analytical technique
Pyrolysis of CFRP and Reforming of Gases Using Zeolite Catalysts
Introduction Carbon fiber reinforced plastic (CFRP) is increasingly used in industries such as aviation and automobiles because of its lightweight
Magic Chemisorber®: A Durable and High-Performance Alternative to Traditional SPME for GC/MS Analysis
Introduction Sample preparation is one of the most critical steps in analytical chemistry, particularly when analyzing trace organic compounds in
Effects of Furnace Temperature Ramp Rate on Peak Temperature in EGA-MS Analysis
Understanding the thermal behavior of polymers is essential for material development, quality control, and failure analysis. One of the most
How Advanced Pyrolysis GCMS is Transforming Plastics and Rubber Analysis in Modern Industries
The plastics and rubber industries are evolving rapidly, driven by the need for precision, quality control, and environmental responsibility. Traditional